所属单位：材料科学与工程学院

发表刊物：Ceramics International

关键字：中文关键字：复合材料；纤维；摩擦；抗磨损性，英文关键字：Composites; Fibers; Friction; Wear resistance

摘要：Ceramic fillers of different types and sizes were introduced into three-dimensional needled integrated fiber felts by one shot infiltration to produce ceramic modified carbon/carbon (C/C) composites. The mass contents of SiC filler with particle sizes of 1.0 and 5.0 mm were about 18% and 13%, respectively; those of B4C filler with particle sizes of 1.5 and 5.0 mm were about 16% and 12%, respectively. The densities of these modified composites, except large-sized B4C filler modified C/C composite, were in the range of 1.60–1.70 g/cm3. Small-sized B4C filler and small-sized SiC filler modified C/C composites had higher coefficients of friction (COF) of 0.37 and 0.32 and lower wear rates of 2.03 and 2.05 mm side 1 cycle 1, respectively, under the braking velocity, pressure, and inertia of 28 m/s, 0.85 MPa, and 0.235 kg m2 respectively. For 50 braking cycles, the COF of these two composites had the lowest fluctuation ( 0.01 to 0.01) relative to the average values. The frictional performance of these modified composites, except large-sized B4C filler modified C/C composite, was negligibly affected by wet environments.

备注：该论文的SCI检索号：000341463500035

合写作者：殷小玮,范尚武,张立同,成来飞,王一光

第一作者：尹洪峰,蔡艳芝

论文类型：期刊论文

卷号：卷：40

期号：期：

页面范围：页：14029–14037

是否译文：否

发表时间：2014-11-01