中文
Profile
VIEW MORE
刘超,教授,硕博士生导师 学习经历 2002年9月~2006年6月 南京工业大学 土木工程专业 学士学位 2006年9月~2009年6月 西安建筑科技大学 工程力学专业 硕士学位 2009年9月~2012年6月 西安建筑科技大学 结构工程专业 博士学位 工作经历 2009年9月~2011年11月  西安建筑科技大学  助教 2011年11月~2013年10月 西安建筑科技大学  讲师 2012年11月~2015年11月 西安建筑科技大学材料科学与工程博士后 2013年11月~2018年11月 西安建筑科技大学  副教授(破格) 2016年 6月~至今       西安市“绿色建筑工业”工程技术中心主任 2018年9月~2019年9月   同济大学高级访问学者 2018年12月~至今       西安建筑科技大学  教授  博导 2020年7月~2022年8月   西...
Chao Liu
Professor
Paper Publications
Experimental Research on Seismic Behavior of Low-carbon Construction Materials RAC Frame Columns
Release time:2024-08-09 Hits:
Affiliation of Author(s):
理学院
Journal:
Advanced Engineering Materials
Key Words:
中文关键字:再生粗骨料;框架柱;再生骨料取代率;滞回曲线;耗能特性,英文关键字:Recycled aggregate concrete;Frame column; Recycled
Abstract:
A comparative study is conducted on the seismic behaviors of three recycled aggregate concrete (RAC) frame columns under low cyclic load. The recycled aggregate replacement rate is 0%, 50%, 100% respectively. The mechanical characteristics, failure mode, hysteresis loops, ductility and consumption characteristics of frame columns with different recycled aggregate replacement rate and same axial compression ratio are analyzed in this paper comparatively. The rule characteristics between ordinary concrete and recycled aggregate concrete frame columns are found. The result indicates that failure process of recycled aggregate concrete frame columns is similar to that of ordinary concrete. The seismic behaviors of recycled aggregate concrete frame columns, including the ductility etc., still meet the related requirements of earthquake-resistance designing. So it is concluded in this paper that the recycled aggregate concrete can be applied in concrete structures. Because of its properties are certain deficiencies, some tectonic measures must be enhanced.
Note:
刘超
Co-author:
赵洪金
First Author:
白国良,Chao Liu
Indexed by:
Journal paper
Volume:
卷:
Issue:
期:
Page Number:
页:
Translation or Not:
no
Date of Publication:
2011-04-01

Pre One:基于荷载长期效应再生混凝土梁受弯性能试验及刚度计算方法

Next One:Study on the rheology and buildability of 3D printed concrete with recycled coarse aggregates