宋永辉

教授    博士生导师    硕士生导师

个人信息 更多+
  • 教师拼音名称: songyonghui
  • 所在单位: 冶金工程学院
  • 学历: 博士研究生毕业
  • 办公地点: 工科楼1003
  • 性别: 男
  • 学位: 博士学位
  • 在职信息: 在职

其他联系方式

邮编:

通讯/办公地址:

办公室电话:

移动电话:

邮箱:

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

effect of extracted compositions of liquefaction residue on the structure and properties of the formed-coke

发布时间:2024-08-09
点击次数:
所属单位:
化学与化工学院
发表刊物:
MATEC Web of Conferences(EI)
关键字:
中文关键字:无,英文关键字:liquefaction residue; the formed-coke;Soxhlet extr
摘要:
The purpose of this paper is to study the effect of extracted compositions of the de-ash liquefaction residue (D-DCLR) on pyrolysis products yields, compressive strength and composition of the formed-coke, which was prepared by co-pyrolysis of the low metamorphic pulverized coal and D-DCLR. The scanning electron microscope (SEM) and the Fourier Transform Infrared (FT-IR) were used to characterize the morphology and functional group of the formed-coke, respectively. The results showed that the extracted compositions of D-DCLR were heavy oil (HS), asphaltene (A), pre-asphaltene (PA) and tetrahydrofuran isolusion (THFIS), whose contents were 5.10%, 40.90%, 14.4%, 39.60%, respectively. During the pyrolysis process, HS was the main source of tar, and HS, A as well as PA were conducive to improve gas yields. The THFIS helped to improve the yield of the formed-coke up to 89.5%, corresponding to the compressive strength was only 147.7N/ball for the coke. A and PA were the key factors affecting the compressive strength and surface structure of the formed-coke. The compressive strength of coke could be up to 728.0N/ball with adding D-DCLR, which reduced by 50% after the removal of A and PA. The FT-IR analysis showed that the types of surface functional groups of the formed-coke were remained the same after co-pyrolysis, but the absorption peak intensity of each functional group was changed.
备注:
宋永辉
合写作者:
MaQiao-Na,HeWen-Jin
第一作者:
宋永辉
论文类型:
期刊论文
卷号:
卷:
期号:
期:67
页面范围:
页:
是否译文:
发表时间:
2016-07-01