张朝晖

教授    博士生导师    硕士生导师

个人信息 更多+
  • 教师拼音名称: zhangchaohui
  • 所在单位: 冶金工程学院
  • 学历: 博士研究生毕业
  • 性别: 男
  • 学位: 博士学位
  • 在职信息: 在职

其他联系方式

邮箱:

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

Study on a new sulfur fixation combustion-supporting agent for coal

发布时间:2024-10-22
点击次数:
所属单位:
冶金工程学院
发表刊物:
Materials for Renewable Energy & Environment (ICMREE), 2011 International Conference on
关键字:
中文关键字:助燃剂;燃烧率;固硫剂;固硫添加剂;固硫率,英文关键字:combustion-supporting agent; combustion ratio; sul
摘要:
In order to improve the coal utilization of rotary kiln for baking siderite and obtain efficient and practical new sulfur fixation combustion-supporting agents, the paper choose the coal used in production in the experiment, the orthogonal test method and thermogravimetric analysis was used to study the coal ignition and combustion rate, and then analyzes the type of combustion-supporting agents, adding amount and particle size of coal influence on the combustion ratio, and it indicated that adding CuCl2 · H2O by 0.3% into the coal below 180 mesh can reduce coal's ignition point for 41 °C and raise the burn rate to 79.23%; we researched that sulfur fixation sorbent types, Ca / S molar ratio, combustion temperature, particle size of coal and pretreatment time on the sulfur-fixing rate, and the CaO was chosen as the sulfur fixation sorbent finally, Ca / S is 2.5, the combustion temperature is 900 °C, the coal particle size is 180 mesh, pretreatment time 30min; under these conditions the sulfur-fixing rate is 51.48%; based on the single test on calcium-based sulfur retention agent, and investigated the influence of the type of sulfur fixation additives, adding volume and pretreatment time on the sulfur-fixing rate, it was found that the Na2CO3 is most promoting in the four. The results showed that adding 0.3% Na2CO3 in the coal, pretreated for 30min, the fixation efficiency of CaO can be increased to 68.17%; comprehensive test results on the three groups to determine the composition of sulfur fixation combustion-supporting agents for the CaO, Na2CO3, CuCl2 · H2O, the ratio is 86%: 7%: 7%. The integration of sulfur combustion test results showed that the addition of 2.0% sulfur fixation combustion-supporting agents into coal can lower the ignition point of 39 °C, improve combustion ratio to 72.51%, and improve the sulfur-- - fixing rate to 61.32%.
备注:
张朝晖(会议EI)
合写作者:
韦武强,鲁慧慧
第一作者:
巨建涛,赵福才,张朝晖
论文类型:
期刊论文
卷号:
卷:
期号:
期:
页面范围:
页:1720-1724
是否译文:
发表时间:
2011-06-01